APPLICATIONS

ROLLING LEVER
ROLLING LEVER with CLAMP ASSEMBLY
ROCK & DEBRIS HAULER
ROCK & DEBRIS HAULER with CLAMP ASSEMBLY
POST & SHRUB PULLER
FIREWOOD HAULER
FIREWOOD HAULING TRAILER
LUMBER & POLE TRANSPORTER
TRAILER JOCKEY
PEOPLE MOVER
BARREL & WATER TRANSPORTER
PLYWOOD & PANEL HAULER
DEBRIS LEVER
ADD A THIRD WHEEL

 

 

 

firewood hauling trailer

 

Components of a WHaTS Firewood Hauling Trailer: 1 very rugged Universal Frame ~ 1 Long Axle (stailnless steel) ~ 2 high quality Flat Proof Wheels ~ 1 Trailer Hitch ~ 1 curved steel Wheel Shield ~ 1 Bed Mesh ~ 1 Back Mesh ~ 2 Front Extensions ~ 2 Common Fronts ~ 1 Post Rack ~ quick attach Detent and Lynch Pins.   Note that the videos may show Firewood Hauling Trailers with a mix of other components, illustrating the versatility of Wheeled Hand Tool Systems in adapting to your specific needs.

 

To order a Firewood Hauling Trailer, please click on "Buy Firewood Hauling Triailer Components" at the end of this page or return to the Featured Applications at the bottom of the HOME page.  

Just sliding the handles out of a Firewood Hauler and sliding in a trailer hitch converts it to a WHaTS Firewood Hauling Trailer.  

This is the front configruation that will ship with a Firewood Hauling Trailer.  It consists of 2 Common Fronts and 1 Post Rack. You may substitute a Post & Shrub puller shown in the photo at the left, if you prefer.

.  


 

Hauling Trailer SpecIFICATIONs:

-800 lbs capcity with 2 wheels, and 1200 lbs capacity with 3!

-Haul wood, rocks, brush, packaged cement, bagged mulch, and more!

-Several locations for rachet straps/tie downs

-All steel, heavy duty construction

-Flat proof wheels with dual high load capacity bearings per wheel

 

*Caution is advised to not load heavier than the safe stopping and handling capabilities of the towing vehicle*

*Do not attempt to make sharp turns or sudden stops on steeply sloped surfaces*

 

The ideal height for the hitch on the towing vehicle is 8 inches (20 cm), however the Firewood Hauling Trailer will tow quite well with hitch heights up to 4 inches (10 cm) higher or lower. 

A steel pin or bolt 3/8"-7/16" (9.5 - 12 mm) in diameter and at least 2 inches (50 mm) long can be used to attach the trailer to the towing vehicle.  The pin or bolt should be secured so that it does not jiggle free and allow the trailer to detach.

 

cost:  $1266     FREE SHIPPING IN THE CONTINENTAL UNITED STATES AND MUCH OF CANADA

YOU ARE PAYING FOR A VERY EFFICIENT, HIGH QUALITY AND RUGGED TOOL.  WHY NOT USE IT FOR MORE THAN ONE APPLICATION WITHOUT THE EXPENSE OF BUYING A COMPLETELY DIFFERENT TOOL?  JUST MIX AND MATCH COMPONENTS FOR MULTIPLE PRODUCTIVE USES.


RAPID CHANGE TO OTHER APPLICATIONS


One of the important features of Wheeled Hand Tool Systems is the ability to rapidly change applications without any tools and without purchasing whole different systems.  Buy additional listed below to accomplish a wide range of tasks!  


  Additional Application            Additional Components     

Approximate Time to Switch

Wheeled Pry Bar

short axle

2 pry bars

2 high handles

3-1/2 minutes
Rolling Lever

2 pry bars

2 high handles

2 minutes
Post & Shrub Puller

puller front

2 high handles

3 minutes
Firewood Hauler
2 high handles
1 minute
Rock & Debris Hauler

2 pry bars

2 high handles

2 minutes

 

Clicking on "Buy Firewood Hauling Trailer Components" below will generate a list of all the parts you need for this application and their cost.  

If you already have components for another application in your cart, it will add only the additional components you need and not duplicate components that are already on the list.

Email us if you need help.


[ BUY FIREWOOD HAULING TRAILER COMPONENTS ]

     


WHY WHaTS?       Component Specifications       Contact Us       Photo Gallery       FAQ
© 2018 Wheeled Hand Tool Systems, Inc.       Site by: JEG DESIGN INC